Portable CO2 Fractional Laser Machine for Scar Removal
Applications:
1. Skin renewing and resurfacing
2. Wrinkle removal, skin tightening
3. Acne and acne scar removal
4. Smooth burnt scars and surgery scars, etc
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
Advantages:
1. USA Coherent RF laser emitter (optional)
1) even output energy, deeper penetration(8-10mm under the skin)
2) long lifetime:8-10 years
3) smaller sopt size:0.01mm at dia
2. Imported excellent 7 articular optical-arm, easy operated and greatly reduces the energy loss;
3. 6 scan modes: sequence, random, maximum distance A&B, Equidistance and fast shot;
4. 7 scan shapes: square, rectangle, round, triangle, oval, 6-diamond shape and line
5. Ultra-quiet pump used, no noise and larger water flow for better cooling, prolong machine life.
6. 2 in 1 system, easy and convenient for operation.
1) Fractional CO2 Laser for skin rejuvenation and scar removal
2) and Normal CO2 laser for surgery operation
7.Particular designed intelligent laser control system ensures a precise treatment
8.Laser energy shooting is an even steady and safe treatment process.
9.Wide range application, effective treatment
10.Easy and fast treatment, no down time.
Features:
1. Particular designed intelligent laser control system ensures a precise treatment
2. Laser energy shooting is an even steady and safe treatment process.
3. Wide range application, effective treatment
4. Easy and fast treatment, no down time.
Basic specification |
Wavelength |
10.6μ m, far-infrared laser |
Control |
LCD 8.4 inch |
Pulse frequency |
33.3 Hz |
Duration |
0.1~10 ms |
Distance |
0.1~2.6 mm |
Interval |
0~6s |
Repeat |
1~5000ms |
overlap |
1~20 times |
Average power |
25W |
Working mode: |
Continuous pulse, single pulse, interval pulse |
Scan Graphics |
Square, rectangle, round, triangle, oval, 6-diamond shape, line |
Dot quantity |
400 dots at most |
Working state |
Hyper-pulsed mode |
Scan mode |
Sequence scan, Random scan, maximum distance scan |
Pulse energy |
10mj to 130mj is optional for each dot. |
Technical specification |
Condenser focus |
f=50mm |
Beam divergence angle |
0.3 mrad |
Spot size |
0.2 mm |
Aiming beam |
Less than 2mW, 635nm red semiconductor laser |
Cooling system |
Closed loop circulating water + air cooling |
Environment temperature |
5-40 C |
Relative humidity |
< 80% |
Temperature in transit |
-40-50 C |
Humidity in transit |
< 85% |
Beam transport device |
Articulated arm with 7-joint and balance weight |
Atmospheric pressure |
86.0kpa-106.0kpa |
Warming up time |
2 min |
Electromagnetic requirement |
No electromagnetic |
Field interference |
N. weight (kg) |
35kg |
Power supply |
220V/110V |